64pixels 16*16cm ws2812b flexible led matrix unit

By Greeled Electronic Ltd
http://www.gree-leds.com/productshow.asp?ArticleID=Z54SX8ZZXX
This is a easy 8Pixel*8pixel DIY digital led matrix unit,designing with slide fastener, they locate at four edge of led martrix. You can pull the edge'slide fastener to enlarge led matrix at four direction. Example: you can use 2pcs led matrix unit to make a 8pixel*16 pixel led matrix. or use 4pcs led matrix unit make a 8pixel*32pixel led matrix. and stick gelatin sponge at the back of units, you only need peel it to stick anywhere.
Technical Parameter:
Working Voltage: DC5V 
Size: 16cm(6.3")*16cm(6.3")*0.5cm(0.2")
LED QTY: 64 Pcs (8Pixel*8Pixel) 
Pitch distance: 2cm(0.794")
IC Type: WS2812B Chip built in SMD5050
PCB materil: FPC 
Waterproof: Non-waterproof
Emiting color: RGB, Input Signal: SPI/TTL signal
Power: Max 20 Watt 
G.W: 80g/pc (Non-waterproof)
Datasheet:
https://drive.google.com/file/d/0B97rs4obIwdZSVI3Sm16S2tWMFk/view?usp=sharing

apa102 white color embedded led strip

http://www.greeled.net/white-color-apa102-led-strip.html
Woking Voltage: 5V DC
Pixel QTY: 32pixel/m,48pixel/m,60pixel/m,66Pixel/m,144Pixel/m
IC Type: APA102 Chip-built-in
Emitting color: Warm white, Natural white, Pure white
Datasheet: 
https://drive.google.com/file/d/0B97rs4obIwdZNXQ2STBjdHIxeFU/view?usp=sharing

white color apa102 chip built in smd5050 led
http://www.greeled.net/apa102-led-white-color.html

white color chip built in apa102 smd5050 led

http://www.greeled.net/apa102-led-white-color.html
APA102 is a intelligent control LED light source that the control circuit and Tri-blue chip with
fluorescent powder are integrated in a package of 5050 components. It internal include 3 groups shift register and Self-detection signdecoder circuit. Also include a 4.5V voltage regulator part and continuous oscillator effectively ensuring the pixel point light color height consistent. The data transfer protocol use two line decoder mode. After the pixel power-on reset, the DIN port receive data from controller after decorder , the first pixel collect initial 24bit data then sent to the internal data register, the other data which reshaping by the internal signal decorder circuit sent to the next cascade pixel through the DO CO port. After transmission for each pixel. LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angle is large, good consistency, low power, long life and other advantages. The control chip integrated in LED above becoming more simple circuit, small volume, convenient installation.
Datasheet:
https://drive.google.com/file/d/0B97rs4obIwdZMXpDM3JYXzRFT2s/view?usp=sharing

apa102 white led strip
http://www.greeled.net/white-color-apa102-led-strip.html

flexible ws2812b led neomatrix panel

http://www.gree-leds.com/productshow.asp?ArticleID=T1R71Z9W93 

4pcs 16*16pixel neomatrix = 1pc 16*64pixel led panel display
16*64pixel,made by 4pcs 16*16pixel ws2812b matrix16*64cm,controlled by GECOSD4P-4096 sd card digital controller, effects edited by lededit2014 software

32*32pixel ws2812b led neomatrix panel
32*32pixel,made by 4pcs 16*16pixel ws2812b matrix 32*32cm,controlled by GECOSD4P-4096 sd card digital controller, effects edited by lededit2014 software

How To Combine DIY WS2812B LED Matrix Unit

By Greeled Electronic Ltd

http://www.greeled.net/diy-ws2812b-led-matrix-unit.html

Model: GEMA2812B256P1 This is an easy 16Pixel*16pixel DIY digital flexible led matrix unit, Pitch distance is 1cm,designing with slide fastener,they locate at four edges of led martrix. You can pull the edge’slide fastener to enlarge led matrix at four direction. Example: you can use 2pcs led matrix unit to make a 16pixel*32pixel led matrix. or use 4pcs led matrix unit make a 16pixel*64pixel led matrix or 32pixel*32pixel led matrix. and stick gelatin sponge at the back of units, you only need peel it to stick anywhere.

Step 1: 2PCS Separated 16*16Pixel 256PCS WS2812B LED Matrix

Step 2: Connect the slide fastener of edge together

Step 3: Pull slide fastener of edge

Step 4: Go on pulling, until these 2pcs DIY matrix units become as 1pc 16*32Pixel Screen Panel

Working With Our SD Card LED Controller (GECOSD1P-2048)

Working With Our 5V Power Supplier

http://www.greeled.net/5v-led-power-supplier.html

The Effect Picture of this 16*32Pixel (DIY Made by 2pcs Matrix Unit) Panel:

WS2812B DIY Matrix Unit

16*16 Pixels WS2812B Soft LED Matirx Display
WS2812B DIY Matrix Unit
DIY Flexible LED Matrix Panel
http://www.greeled.net/diy-ws2812b-led-matrix-unit.html
This is a easy 16Pixel*16pixel DIY digital led matrix unit,designing with slide fastener, they locate at four edge of led martrix. You can pull the edge'slide fastener to enlarge led matrix at four direction. Example: you can use 2pcs led matrix unit to make a 16pixel*32pixel led matrix. or use 4pcs led matrix unit make a 16pixel*64pixel led matrix. and stick gelatin sponge at the back of units, you only need peel it to stick anywhere.
Technical Paramter:
Working Voltage: DC5V
Size: 16cm(6.3")*16cm(6.3")*0.5cm(0.2")
LED QTY: 256 Pcs (16Pixel*16Pixel)
Pitch distance: 1cm(0.397")
IC Type: WS2812B Chip built in SMD5050
PCB materil: FPC
Waterproof: Non-waterproof/ IP65
Emiting color: RGB, Input Signal: SPI/TTL signal
Power: Max 70Watt
G.W: 90g/pc (Non-waterproof), 200g/pc(IP65)
Datasheet link: 
Note: if you need other Size and IC' matrix, we here can support OEM and ODM.

5MM Clear WS2811 NeoPixel String

5MM Clear WS2811 NeoPixel String
http://www.greeled.net/ws2811-programmable-mini-rgb-string.html
working Voltage: 5V DC
Power Consumption: 0.24W/Pcs
IC type: WS2811 chip built in
Waterpoof Type: IP67
Punch holes size: Diamter 9MM
Size of LED light: 5MM
Material of crust: Clarity PVC
Connect 50pcs each strand
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 9mm drill hole in any material up to 1.5mm/0.06" thick. They're typically used to make outdoor signs.
Sold by the strand, each strand has 50 pixels in series!The pixels are connected by a 3-conductor cable. +5V, ground, data . Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end